Our Products

SBYV is your one-source Distributor for medical equipment catering to respiratory, pulmonology, suction apparatus and critical care.

Advantage SBYV Products

  • Cutting-edge therapy efficacies.
  • Highest level of clinical performance and patient compliance.
  • Proven methodologies.
  • Value for money.
  • Patient-ready equipment.
  • SleepCube Standard

    SleepCube Standard

    Once diagnosed with Obstructive Sleep Apnoea (OSA) the most common and widely accepted treatment is continuous Positive Airways Pressure (CPAP) therapy. The SleepCube standard CPAP is the first in the range of sleep therapy devices from DeVilbiss Healthcare. It provides a fixed pressure of between 3cm H2O and 20cm H2O throughout the night. The SleepCube standard also includes the integrated SmartCode patient compliance feature for remote monitoring. For those patients requiring humidification, each device in the SleepCube range can be fitted with a heated humidifier, a separate unit which clips easily to the underside of the device. The SleepCube series’ multi voltage capability allows it to be used virtually anywhere in the world and it can also be operated from a 12V power source such as those found in a motor home.

  • SleepCube Plus

    SleepCube Plus

    The SleepCube StandardPlus is a fixed pressure device which offers all the features of a SleepCube Standard device with the addition of SmartFlex expiratory relief feature. SmartFlex is designed to lower the average pressure throughout the night thus increasing comfort for the user and adherence to CPAP therapy. For additional comfort the DeVilbiss Flow Rounding feature is also included in the Standard Plus device and works by easing the transition between IPAP (inspiratory pressure) and EPAP (expiratory pressure) according to the user’s requirements. As with all SleepCube CPAP’s the optional heated humidifier can be easily connected to the base of the device.

  • SleepCube AutoPlus

    SleepCube AutoPlus

    The SleepCube Auto Plus is an auto adjusting PAP device with SmartFlex expiratory relief comfort feature suitable for performing overnight titrations in hospital or at home. Unlike the SleepCube fixed pressure devices, the Auto Plus automatically adjusts its pressure in response to apnoeas, hypopnoeas and snoring, finding the optimum pressure settings throughout the night. In addition, the SmartFlex and Flow Rounding features provide added comfort for the patient, ensuring a good night’s rest.

  • SleepCube BiLevel S

    SleepCube BiLevel S

    The SleepCube BiLevel S is a variation on traditional CPAP. Instead of providing air at a constant pressure all night, the machine “senses” if you are breathing in or out and varies its level of pressure accordingly. On inspiration a higher pressure is needed to prevent apnoeas, hypopnoeas or snoring. On expiration a lower pressure is adopted to ensure patient comfort with less resistance. A BiLevel S is particularly beneficial for those users who require a higher pressure setting.

  • SleepCube AutoBilevel

    SleepCube AutoBilevel

    The SleepCube AutoBilevel adds an extra level of comfort for Bilevel users. Traditional BiLevel therapy uses a higher fixed level of inspiratory pressure (IPAP) and a lower expiratory pressure (EPAP) to prevent apnoeas, hypopnoeas or snoring. Using our ‘proven’ auto-adjusting algorithm the AutoBilevel constantly monitors for apnoeas and events. Upon their detection the Bilevel pressure automatically adjusts to deliver the best possible treatment during sleep. This is especially useful and comfortable for those users who require high pressures.

  • SleepCube BiLevel ST

    SleepCube BiLevel ST

    The SleepCube BiLevel ST device is designed to enhance the breathing of patients with spontaneous respiration. Unlike a ventilator, it will not completely take over the breathing for the patient, but instead helps a patient who has chronic respiratory failure, difficulty breathing, or obstructive sleep apnoea; it is administered via a mask and is non-invasive. The device automatically synchronises with the patients' respiratory pattern, cycling between IPAP (inspiratory pressure) and EPAP (expiratory pressure). The BiLevel ST can also be set to a timed mode, where the clinician sets the BPM (breaths per minute) and %IPAP; or it can be set to a combination of Spontaneous and Timed operation, where the unit cycles in response to the patient’s breathing rate, but switches to the timed operation if the patient fails to take a breath within the timed interval.

  • Nasal & Full Face Mask

    Nasal & Full Face Mask

    Available as Full Face or Nasal, Innova™ gives unsurpassed facial comfort and skin protection. The Innova series offers the latest in comfort. With its combination of patented AIR°gel™ and Advanced Cushion Technology (ACT), the Innova enhances user compliance with sleep disordered breathing therapy and improves comfort. The Innova series is designed to rest lightly on the face. AIR°gel gently protects the skin and the bridge of the nose to minimise necrosis and other irritations. Advanced Cushion Technology (ACT) ergonomically adapts to unique facial features, ensuring an optimum seal without the need to over-tighten the straps, reducing discomfort, skin irritation and air leaks. The ‘Touchless’ Spacebar™ design eliminates the need for the traditional forehead pad, removing a potential point for skin irritation. The Active Headgear Connector™ moves with you to maintain a good seal as you sleep. Together these features provide an Innovative solution for a great night’s sleep.

  • SleepCube Standard

    SleepCube Standard

    Once diagnosed with Obstructive Sleep Apnoea (OSA) the most common and widely accepted treatment is continuous Positive Airways Pressure (CPAP) therapy. The SleepCube standard CPAP is the first in the range of sleep therapy devices from DeVilbiss Healthcare. It provides a fixed pressure of between 3cm H2O and 20cm H2O throughout the night. The SleepCube standard also includes the integrated SmartCode patient compliance feature for remote monitoring. For those patients requiring humidification, each device in the SleepCube range can be fitted with a heated humidifier, a separate unit which clips easily to the underside of the device. The SleepCube series’ multi voltage capability allows it to be used virtually anywhere in the world and it can also be operated from a 12V power source such as those found in a motor home.

  • SleepCube Plus

    SleepCube Plus

    The SleepCube StandardPlus is a fixed pressure device which offers all the features of a SleepCube Standard device with the addition of SmartFlex expiratory relief feature. SmartFlex is designed to lower the average pressure throughout the night thus increasing comfort for the user and adherence to CPAP therapy. For additional comfort the DeVilbiss Flow Rounding feature is also included in the Standard Plus device and works by easing the transition between IPAP (inspiratory pressure) and EPAP (expiratory pressure) according to the user’s requirements. As with all SleepCube CPAP’s the optional heated humidifier can be easily connected to the base of the device.

  • SleepCube AutoPlus

    SleepCube AutoPlus

    The SleepCube Auto Plus is an auto adjusting PAP device with SmartFlex expiratory relief comfort feature suitable for performing overnight titrations in hospital or at home. Unlike the SleepCube fixed pressure devices, the Auto Plus automatically adjusts its pressure in response to apnoeas, hypopnoeas and snoring, finding the optimum pressure settings throughout the night. In addition, the SmartFlex and Flow Rounding features provide added comfort for the patient, ensuring a good night’s rest.

  • SleepCube BiLevel S

    SleepCube BiLevel S

    The SleepCube BiLevel S is a variation on traditional CPAP. Instead of providing air at a constant pressure all night, the machine “senses” if you are breathing in or out and varies its level of pressure accordingly. On inspiration a higher pressure is needed to prevent apnoeas, hypopnoeas or snoring. On expiration a lower pressure is adopted to ensure patient comfort with less resistance. A BiLevel S is particularly beneficial for those users who require a higher pressure setting.

  • SleepCube AutoBilevel

    SleepCube AutoBilevel

    The SleepCube AutoBilevel adds an extra level of comfort for Bilevel users. Traditional BiLevel therapy uses a higher fixed level of inspiratory pressure (IPAP) and a lower expiratory pressure (EPAP) to prevent apnoeas, hypopnoeas or snoring. Using our ‘proven’ auto-adjusting algorithm the AutoBilevel constantly monitors for apnoeas and events. Upon their detection the Bilevel pressure automatically adjusts to deliver the best possible treatment during sleep. This is especially useful and comfortable for those users who require high pressures.

  • SleepCube BiLevel ST

    SleepCube BiLevel ST

    The SleepCube BiLevel ST device is designed to enhance the breathing of patients with spontaneous respiration. Unlike a ventilator, it will not completely take over the breathing for the patient, but instead helps a patient who has chronic respiratory failure, difficulty breathing, or obstructive sleep apnoea; it is administered via a mask and is non-invasive. The device automatically synchronises with the patients' respiratory pattern, cycling between IPAP (inspiratory pressure) and EPAP (expiratory pressure). The BiLevel ST can also be set to a timed mode, where the clinician sets the BPM (breaths per minute) and %IPAP; or it can be set to a combination of Spontaneous and Timed operation, where the unit cycles in response to the patient’s breathing rate, but switches to the timed operation if the patient fails to take a breath within the timed interval.

  • Nasal & Full Face Mask

    Nasal & Full Face Mask

    Available as Full Face or Nasal, Innova™ gives unsurpassed facial comfort and skin protection. The Innova series offers the latest in comfort. With its combination of patented AIR°gel™ and Advanced Cushion Technology (ACT), the Innova enhances user compliance with sleep disordered breathing therapy and improves comfort. The Innova series is designed to rest lightly on the face. AIR°gel gently protects the skin and the bridge of the nose to minimise necrosis and other irritations. Advanced Cushion Technology (ACT) ergonomically adapts to unique facial features, ensuring an optimum seal without the need to over-tighten the straps, reducing discomfort, skin irritation and air leaks. The ‘Touchless’ Spacebar™ design eliminates the need for the traditional forehead pad, removing a potential point for skin irritation. The Active Headgear Connector™ moves with you to maintain a good seal as you sleep. Together these features provide an Innovative solution for a great night’s sleep.

  • SleepCube Standard

    SleepCube Standard

    Once diagnosed with Obstructive Sleep Apnoea (OSA) the most common and widely accepted treatment is continuous Positive Airways Pressure (CPAP) therapy. The SleepCube standard CPAP is the first in the range of sleep therapy devices from DeVilbiss Healthcare. It provides a fixed pressure of between 3cm H2O and 20cm H2O throughout the night. The SleepCube standard also includes the integrated SmartCode patient compliance feature for remote monitoring. For those patients requiring humidification, each device in the SleepCube range can be fitted with a heated humidifier, a separate unit which clips easily to the underside of the device. The SleepCube series’ multi voltage capability allows it to be used virtually anywhere in the world and it can also be operated from a 12V power source such as those found in a motor home.

  • SleepCube Plus

    SleepCube Plus

    The SleepCube StandardPlus is a fixed pressure device which offers all the features of a SleepCube Standard device with the addition of SmartFlex expiratory relief feature. SmartFlex is designed to lower the average pressure throughout the night thus increasing comfort for the user and adherence to CPAP therapy. For additional comfort the DeVilbiss Flow Rounding feature is also included in the Standard Plus device and works by easing the transition between IPAP (inspiratory pressure) and EPAP (expiratory pressure) according to the user’s requirements. As with all SleepCube CPAP’s the optional heated humidifier can be easily connected to the base of the device.

  • SleepCube AutoPlus

    SleepCube AutoPlus

    The SleepCube Auto Plus is an auto adjusting PAP device with SmartFlex expiratory relief comfort feature suitable for performing overnight titrations in hospital or at home. Unlike the SleepCube fixed pressure devices, the Auto Plus automatically adjusts its pressure in response to apnoeas, hypopnoeas and snoring, finding the optimum pressure settings throughout the night. In addition, the SmartFlex and Flow Rounding features provide added comfort for the patient, ensuring a good night’s rest.

  • SleepCube BiLevel S

    SleepCube BiLevel S

    The SleepCube BiLevel S is a variation on traditional CPAP. Instead of providing air at a constant pressure all night, the machine “senses” if you are breathing in or out and varies its level of pressure accordingly. On inspiration a higher pressure is needed to prevent apnoeas, hypopnoeas or snoring. On expiration a lower pressure is adopted to ensure patient comfort with less resistance. A BiLevel S is particularly beneficial for those users who require a higher pressure setting.

  • SleepCube AutoBilevel

    SleepCube AutoBilevel

    The SleepCube AutoBilevel adds an extra level of comfort for Bilevel users. Traditional BiLevel therapy uses a higher fixed level of inspiratory pressure (IPAP) and a lower expiratory pressure (EPAP) to prevent apnoeas, hypopnoeas or snoring. Using our ‘proven’ auto-adjusting algorithm the AutoBilevel constantly monitors for apnoeas and events. Upon their detection the Bilevel pressure automatically adjusts to deliver the best possible treatment during sleep. This is especially useful and comfortable for those users who require high pressures.

  • SleepCube BiLevel ST

    SleepCube BiLevel ST

    The SleepCube BiLevel ST device is designed to enhance the breathing of patients with spontaneous respiration. Unlike a ventilator, it will not completely take over the breathing for the patient, but instead helps a patient who has chronic respiratory failure, difficulty breathing, or obstructive sleep apnoea; it is administered via a mask and is non-invasive. The device automatically synchronises with the patients' respiratory pattern, cycling between IPAP (inspiratory pressure) and EPAP (expiratory pressure). The BiLevel ST can also be set to a timed mode, where the clinician sets the BPM (breaths per minute) and %IPAP; or it can be set to a combination of Spontaneous and Timed operation, where the unit cycles in response to the patient’s breathing rate, but switches to the timed operation if the patient fails to take a breath within the timed interval.

  • Nasal & Full Face Mask

    Nasal & Full Face Mask

    Available as Full Face or Nasal, Innova™ gives unsurpassed facial comfort and skin protection. The Innova series offers the latest in comfort. With its combination of patented AIR°gel™ and Advanced Cushion Technology (ACT), the Innova enhances user compliance with sleep disordered breathing therapy and improves comfort. The Innova series is designed to rest lightly on the face. AIR°gel gently protects the skin and the bridge of the nose to minimise necrosis and other irritations. Advanced Cushion Technology (ACT) ergonomically adapts to unique facial features, ensuring an optimum seal without the need to over-tighten the straps, reducing discomfort, skin irritation and air leaks. The ‘Touchless’ Spacebar™ design eliminates the need for the traditional forehead pad, removing a potential point for skin irritation. The Active Headgear Connector™ moves with you to maintain a good seal as you sleep. Together these features provide an Innovative solution for a great night’s sleep.

  • SleepCube Standard

    SleepCube Standard

    Once diagnosed with Obstructive Sleep Apnoea (OSA) the most common and widely accepted treatment is continuous Positive Airways Pressure (CPAP) therapy. The SleepCube standard CPAP is the first in the range of sleep therapy devices from DeVilbiss Healthcare. It provides a fixed pressure of between 3cm H2O and 20cm H2O throughout the night. The SleepCube standard also includes the integrated SmartCode patient compliance feature for remote monitoring. For those patients requiring humidification, each device in the SleepCube range can be fitted with a heated humidifier, a separate unit which clips easily to the underside of the device. The SleepCube series’ multi voltage capability allows it to be used virtually anywhere in the world and it can also be operated from a 12V power source such as those found in a motor home.

  • SleepCube Plus

    SleepCube Plus

    The SleepCube StandardPlus is a fixed pressure device which offers all the features of a SleepCube Standard device with the addition of SmartFlex expiratory relief feature. SmartFlex is designed to lower the average pressure throughout the night thus increasing comfort for the user and adherence to CPAP therapy. For additional comfort the DeVilbiss Flow Rounding feature is also included in the Standard Plus device and works by easing the transition between IPAP (inspiratory pressure) and EPAP (expiratory pressure) according to the user’s requirements. As with all SleepCube CPAP’s the optional heated humidifier can be easily connected to the base of the device.

  • SleepCube AutoPlus

    SleepCube AutoPlus

    The SleepCube Auto Plus is an auto adjusting PAP device with SmartFlex expiratory relief comfort feature suitable for performing overnight titrations in hospital or at home. Unlike the SleepCube fixed pressure devices, the Auto Plus automatically adjusts its pressure in response to apnoeas, hypopnoeas and snoring, finding the optimum pressure settings throughout the night. In addition, the SmartFlex and Flow Rounding features provide added comfort for the patient, ensuring a good night’s rest.

  • SleepCube BiLevel S

    SleepCube BiLevel S

    The SleepCube BiLevel S is a variation on traditional CPAP. Instead of providing air at a constant pressure all night, the machine “senses” if you are breathing in or out and varies its level of pressure accordingly. On inspiration a higher pressure is needed to prevent apnoeas, hypopnoeas or snoring. On expiration a lower pressure is adopted to ensure patient comfort with less resistance. A BiLevel S is particularly beneficial for those users who require a higher pressure setting.

  • SleepCube AutoBilevel

    SleepCube AutoBilevel

    The SleepCube AutoBilevel adds an extra level of comfort for Bilevel users. Traditional BiLevel therapy uses a higher fixed level of inspiratory pressure (IPAP) and a lower expiratory pressure (EPAP) to prevent apnoeas, hypopnoeas or snoring. Using our ‘proven’ auto-adjusting algorithm the AutoBilevel constantly monitors for apnoeas and events. Upon their detection the Bilevel pressure automatically adjusts to deliver the best possible treatment during sleep. This is especially useful and comfortable for those users who require high pressures.

  • SleepCube BiLevel ST

    SleepCube BiLevel ST

    The SleepCube BiLevel ST device is designed to enhance the breathing of patients with spontaneous respiration. Unlike a ventilator, it will not completely take over the breathing for the patient, but instead helps a patient who has chronic respiratory failure, difficulty breathing, or obstructive sleep apnoea; it is administered via a mask and is non-invasive. The device automatically synchronises with the patients' respiratory pattern, cycling between IPAP (inspiratory pressure) and EPAP (expiratory pressure). The BiLevel ST can also be set to a timed mode, where the clinician sets the BPM (breaths per minute) and %IPAP; or it can be set to a combination of Spontaneous and Timed operation, where the unit cycles in response to the patient’s breathing rate, but switches to the timed operation if the patient fails to take a breath within the timed interval.

  • Nasal & Full Face Mask

    Nasal & Full Face Mask

    Available as Full Face or Nasal, Innova™ gives unsurpassed facial comfort and skin protection. The Innova series offers the latest in comfort. With its combination of patented AIR°gel™ and Advanced Cushion Technology (ACT), the Innova enhances user compliance with sleep disordered breathing therapy and improves comfort. The Innova series is designed to rest lightly on the face. AIR°gel gently protects the skin and the bridge of the nose to minimise necrosis and other irritations. Advanced Cushion Technology (ACT) ergonomically adapts to unique facial features, ensuring an optimum seal without the need to over-tighten the straps, reducing discomfort, skin irritation and air leaks. The ‘Touchless’ Spacebar™ design eliminates the need for the traditional forehead pad, removing a potential point for skin irritation. The Active Headgear Connector™ moves with you to maintain a good seal as you sleep. Together these features provide an Innovative solution for a great night’s sleep.

  • SleepCube Standard

    SleepCube Standard

    Once diagnosed with Obstructive Sleep Apnoea (OSA) the most common and widely accepted treatment is continuous Positive Airways Pressure (CPAP) therapy. The SleepCube standard CPAP is the first in the range of sleep therapy devices from DeVilbiss Healthcare. It provides a fixed pressure of between 3cm H2O and 20cm H2O throughout the night. The SleepCube standard also includes the integrated SmartCode patient compliance feature for remote monitoring. For those patients requiring humidification, each device in the SleepCube range can be fitted with a heated humidifier, a separate unit which clips easily to the underside of the device. The SleepCube series’ multi voltage capability allows it to be used virtually anywhere in the world and it can also be operated from a 12V power source such as those found in a motor home.

  • SleepCube Plus

    SleepCube Plus

    The SleepCube StandardPlus is a fixed pressure device which offers all the features of a SleepCube Standard device with the addition of SmartFlex expiratory relief feature. SmartFlex is designed to lower the average pressure throughout the night thus increasing comfort for the user and adherence to CPAP therapy. For additional comfort the DeVilbiss Flow Rounding feature is also included in the Standard Plus device and works by easing the transition between IPAP (inspiratory pressure) and EPAP (expiratory pressure) according to the user’s requirements. As with all SleepCube CPAP’s the optional heated humidifier can be easily connected to the base of the device.

  • SleepCube AutoPlus

    SleepCube AutoPlus

    The SleepCube Auto Plus is an auto adjusting PAP device with SmartFlex expiratory relief comfort feature suitable for performing overnight titrations in hospital or at home. Unlike the SleepCube fixed pressure devices, the Auto Plus automatically adjusts its pressure in response to apnoeas, hypopnoeas and snoring, finding the optimum pressure settings throughout the night. In addition, the SmartFlex and Flow Rounding features provide added comfort for the patient, ensuring a good night’s rest.

  • SleepCube BiLevel S

    SleepCube BiLevel S

    The SleepCube BiLevel S is a variation on traditional CPAP. Instead of providing air at a constant pressure all night, the machine “senses” if you are breathing in or out and varies its level of pressure accordingly. On inspiration a higher pressure is needed to prevent apnoeas, hypopnoeas or snoring. On expiration a lower pressure is adopted to ensure patient comfort with less resistance. A BiLevel S is particularly beneficial for those users who require a higher pressure setting.

  • SleepCube AutoBilevel

    SleepCube AutoBilevel

    The SleepCube AutoBilevel adds an extra level of comfort for Bilevel users. Traditional BiLevel therapy uses a higher fixed level of inspiratory pressure (IPAP) and a lower expiratory pressure (EPAP) to prevent apnoeas, hypopnoeas or snoring. Using our ‘proven’ auto-adjusting algorithm the AutoBilevel constantly monitors for apnoeas and events. Upon their detection the Bilevel pressure automatically adjusts to deliver the best possible treatment during sleep. This is especially useful and comfortable for those users who require high pressures.

  • SleepCube BiLevel ST

    SleepCube BiLevel ST

    The SleepCube BiLevel ST device is designed to enhance the breathing of patients with spontaneous respiration. Unlike a ventilator, it will not completely take over the breathing for the patient, but instead helps a patient who has chronic respiratory failure, difficulty breathing, or obstructive sleep apnoea; it is administered via a mask and is non-invasive. The device automatically synchronises with the patients' respiratory pattern, cycling between IPAP (inspiratory pressure) and EPAP (expiratory pressure). The BiLevel ST can also be set to a timed mode, where the clinician sets the BPM (breaths per minute) and %IPAP; or it can be set to a combination of Spontaneous and Timed operation, where the unit cycles in response to the patient’s breathing rate, but switches to the timed operation if the patient fails to take a breath within the timed interval.

  • Nasal & Full Face Mask

    Nasal & Full Face Mask

    Available as Full Face or Nasal, Innova™ gives unsurpassed facial comfort and skin protection. The Innova series offers the latest in comfort. With its combination of patented AIR°gel™ and Advanced Cushion Technology (ACT), the Innova enhances user compliance with sleep disordered breathing therapy and improves comfort. The Innova series is designed to rest lightly on the face. AIR°gel gently protects the skin and the bridge of the nose to minimise necrosis and other irritations. Advanced Cushion Technology (ACT) ergonomically adapts to unique facial features, ensuring an optimum seal without the need to over-tighten the straps, reducing discomfort, skin irritation and air leaks. The ‘Touchless’ Spacebar™ design eliminates the need for the traditional forehead pad, removing a potential point for skin irritation. The Active Headgear Connector™ moves with you to maintain a good seal as you sleep. Together these features provide an Innovative solution for a great night’s sleep.

  • SleepCube Standard

    SleepCube Standard

    Once diagnosed with Obstructive Sleep Apnoea (OSA) the most common and widely accepted treatment is continuous Positive Airways Pressure (CPAP) therapy. The SleepCube standard CPAP is the first in the range of sleep therapy devices from DeVilbiss Healthcare. It provides a fixed pressure of between 3cm H2O and 20cm H2O throughout the night. The SleepCube standard also includes the integrated SmartCode patient compliance feature for remote monitoring. For those patients requiring humidification, each device in the SleepCube range can be fitted with a heated humidifier, a separate unit which clips easily to the underside of the device. The SleepCube series’ multi voltage capability allows it to be used virtually anywhere in the world and it can also be operated from a 12V power source such as those found in a motor home.

  • SleepCube Plus

    SleepCube Plus

    The SleepCube StandardPlus is a fixed pressure device which offers all the features of a SleepCube Standard device with the addition of SmartFlex expiratory relief feature. SmartFlex is designed to lower the average pressure throughout the night thus increasing comfort for the user and adherence to CPAP therapy. For additional comfort the DeVilbiss Flow Rounding feature is also included in the Standard Plus device and works by easing the transition between IPAP (inspiratory pressure) and EPAP (expiratory pressure) according to the user’s requirements. As with all SleepCube CPAP’s the optional heated humidifier can be easily connected to the base of the device.

  • SleepCube AutoPlus

    SleepCube AutoPlus

    The SleepCube Auto Plus is an auto adjusting PAP device with SmartFlex expiratory relief comfort feature suitable for performing overnight titrations in hospital or at home. Unlike the SleepCube fixed pressure devices, the Auto Plus automatically adjusts its pressure in response to apnoeas, hypopnoeas and snoring, finding the optimum pressure settings throughout the night. In addition, the SmartFlex and Flow Rounding features provide added comfort for the patient, ensuring a good night’s rest.

  • SleepCube BiLevel S

    SleepCube BiLevel S

    The SleepCube BiLevel S is a variation on traditional CPAP. Instead of providing air at a constant pressure all night, the machine “senses” if you are breathing in or out and varies its level of pressure accordingly. On inspiration a higher pressure is needed to prevent apnoeas, hypopnoeas or snoring. On expiration a lower pressure is adopted to ensure patient comfort with less resistance. A BiLevel S is particularly beneficial for those users who require a higher pressure setting.

  • SleepCube AutoBilevel

    SleepCube AutoBilevel

    The SleepCube AutoBilevel adds an extra level of comfort for Bilevel users. Traditional BiLevel therapy uses a higher fixed level of inspiratory pressure (IPAP) and a lower expiratory pressure (EPAP) to prevent apnoeas, hypopnoeas or snoring. Using our ‘proven’ auto-adjusting algorithm the AutoBilevel constantly monitors for apnoeas and events. Upon their detection the Bilevel pressure automatically adjusts to deliver the best possible treatment during sleep. This is especially useful and comfortable for those users who require high pressures.

  • SleepCube BiLevel ST

    SleepCube BiLevel ST

    The SleepCube BiLevel ST device is designed to enhance the breathing of patients with spontaneous respiration. Unlike a ventilator, it will not completely take over the breathing for the patient, but instead helps a patient who has chronic respiratory failure, difficulty breathing, or obstructive sleep apnoea; it is administered via a mask and is non-invasive. The device automatically synchronises with the patients' respiratory pattern, cycling between IPAP (inspiratory pressure) and EPAP (expiratory pressure). The BiLevel ST can also be set to a timed mode, where the clinician sets the BPM (breaths per minute) and %IPAP; or it can be set to a combination of Spontaneous and Timed operation, where the unit cycles in response to the patient’s breathing rate, but switches to the timed operation if the patient fails to take a breath within the timed interval.

  • Nasal & Full Face Mask

    Nasal & Full Face Mask

    Available as Full Face or Nasal, Innova™ gives unsurpassed facial comfort and skin protection. The Innova series offers the latest in comfort. With its combination of patented AIR°gel™ and Advanced Cushion Technology (ACT), the Innova enhances user compliance with sleep disordered breathing therapy and improves comfort. The Innova series is designed to rest lightly on the face. AIR°gel gently protects the skin and the bridge of the nose to minimise necrosis and other irritations. Advanced Cushion Technology (ACT) ergonomically adapts to unique facial features, ensuring an optimum seal without the need to over-tighten the straps, reducing discomfort, skin irritation and air leaks. The ‘Touchless’ Spacebar™ design eliminates the need for the traditional forehead pad, removing a potential point for skin irritation. The Active Headgear Connector™ moves with you to maintain a good seal as you sleep. Together these features provide an Innovative solution for a great night’s sleep.

  • SleepCube Standard

    SleepCube Standard

    Once diagnosed with Obstructive Sleep Apnoea (OSA) the most common and widely accepted treatment is continuous Positive Airways Pressure (CPAP) therapy. The SleepCube standard CPAP is the first in the range of sleep therapy devices from DeVilbiss Healthcare. It provides a fixed pressure of between 3cm H2O and 20cm H2O throughout the night. The SleepCube standard also includes the integrated SmartCode patient compliance feature for remote monitoring. For those patients requiring humidification, each device in the SleepCube range can be fitted with a heated humidifier, a separate unit which clips easily to the underside of the device. The SleepCube series’ multi voltage capability allows it to be used virtually anywhere in the world and it can also be operated from a 12V power source such as those found in a motor home.

  • SleepCube Plus

    SleepCube Plus

    The SleepCube StandardPlus is a fixed pressure device which offers all the features of a SleepCube Standard device with the addition of SmartFlex expiratory relief feature. SmartFlex is designed to lower the average pressure throughout the night thus increasing comfort for the user and adherence to CPAP therapy. For additional comfort the DeVilbiss Flow Rounding feature is also included in the Standard Plus device and works by easing the transition between IPAP (inspiratory pressure) and EPAP (expiratory pressure) according to the user’s requirements. As with all SleepCube CPAP’s the optional heated humidifier can be easily connected to the base of the device.

  • SleepCube AutoPlus

    SleepCube AutoPlus

    The SleepCube Auto Plus is an auto adjusting PAP device with SmartFlex expiratory relief comfort feature suitable for performing overnight titrations in hospital or at home. Unlike the SleepCube fixed pressure devices, the Auto Plus automatically adjusts its pressure in response to apnoeas, hypopnoeas and snoring, finding the optimum pressure settings throughout the night. In addition, the SmartFlex and Flow Rounding features provide added comfort for the patient, ensuring a good night’s rest.

  • SleepCube BiLevel S

    SleepCube BiLevel S

    The SleepCube BiLevel S is a variation on traditional CPAP. Instead of providing air at a constant pressure all night, the machine “senses” if you are breathing in or out and varies its level of pressure accordingly. On inspiration a higher pressure is needed to prevent apnoeas, hypopnoeas or snoring. On expiration a lower pressure is adopted to ensure patient comfort with less resistance. A BiLevel S is particularly beneficial for those users who require a higher pressure setting.

  • SleepCube AutoBilevel

    SleepCube AutoBilevel

    The SleepCube AutoBilevel adds an extra level of comfort for Bilevel users. Traditional BiLevel therapy uses a higher fixed level of inspiratory pressure (IPAP) and a lower expiratory pressure (EPAP) to prevent apnoeas, hypopnoeas or snoring. Using our ‘proven’ auto-adjusting algorithm the AutoBilevel constantly monitors for apnoeas and events. Upon their detection the Bilevel pressure automatically adjusts to deliver the best possible treatment during sleep. This is especially useful and comfortable for those users who require high pressures.

  • SleepCube BiLevel ST

    SleepCube BiLevel ST

    The SleepCube BiLevel ST device is designed to enhance the breathing of patients with spontaneous respiration. Unlike a ventilator, it will not completely take over the breathing for the patient, but instead helps a patient who has chronic respiratory failure, difficulty breathing, or obstructive sleep apnoea; it is administered via a mask and is non-invasive. The device automatically synchronises with the patients' respiratory pattern, cycling between IPAP (inspiratory pressure) and EPAP (expiratory pressure). The BiLevel ST can also be set to a timed mode, where the clinician sets the BPM (breaths per minute) and %IPAP; or it can be set to a combination of Spontaneous and Timed operation, where the unit cycles in response to the patient’s breathing rate, but switches to the timed operation if the patient fails to take a breath within the timed interval.

  • Nasal & Full Face Mask

    Nasal & Full Face Mask

    Available as Full Face or Nasal, Innova™ gives unsurpassed facial comfort and skin protection. The Innova series offers the latest in comfort. With its combination of patented AIR°gel™ and Advanced Cushion Technology (ACT), the Innova enhances user compliance with sleep disordered breathing therapy and improves comfort. The Innova series is designed to rest lightly on the face. AIR°gel gently protects the skin and the bridge of the nose to minimise necrosis and other irritations. Advanced Cushion Technology (ACT) ergonomically adapts to unique facial features, ensuring an optimum seal without the need to over-tighten the straps, reducing discomfort, skin irritation and air leaks. The ‘Touchless’ Spacebar™ design eliminates the need for the traditional forehead pad, removing a potential point for skin irritation. The Active Headgear Connector™ moves with you to maintain a good seal as you sleep. Together these features provide an Innovative solution for a great night’s sleep.

  • Compact 525 Oxygen Concentrator

    Compact 525 Oxygen Concentrator

    Manufacturing products that are of the highest possible quality is key to DeVilbiss Healthcare. The latest Compact 525 oxygen concentrator is designed and built to meet the high demands of patients and cost challenges faced by service providers. In commitment to our quality aims, we have invested in new manufacturing processes and innovative production techniques. The new black, Compact 525 is now manufactured at our dedicated oxygen therapy facility in Pennsylvania, USA, which has given us the control to deliver a reliable, high quality, more eco-friendly oxygen concentrator. Delivering up to 5 litres per minute with high oxygen concentration across all flow rates and adopting the latest developments in the reduction of sound and power consumption, the latest Compact 525 increases patient comfort and lowers operating costs.